Find

  • All tenders
Switzerland: Tenders/ETH Zürich - Abt. Procurement & Export Services/A universal testing machine for tensile and compressive load tests, equipped with two additional actuators (1 unit)

A universal testing machine for tensile and compressive load tests, equipped with two additional actuators (1 unit)

Awarded

The competition has ended and a winner has been selected.

Award
Procedure
OpenSingle stage
Agreement
Buying goods

Brief

ETH Zürich - Abt. Procurement & Export Services has entered into an agreement with Walter + Bai AG for the delivery of a universal testing machine for tensile and compressive load tests, equipped with two additional actuators, to the construction hall at the Hönggerberg site in Zürich, Switzerland, for a total value of 1,393,950 CHF. The machine is intended for testing large-scale components under realistic static and dynamic loads, supporting research in steel, composite, and earthquake engineering. It must accommodate test specimens up to 1500 mm (width) x 1500 mm (height) x 5000 mm (length), with clamping heights from 500 to 5000 mm. The hydraulic system requires a vertical cylinder with 10 MN compressive load, 6 MN tensile load, and 400 mm stroke, plus two horizontal cylinders each with 1 MN compressive/tensile load and 500 mm stroke, capable of dynamic tests up to 10 Hz and speeds up to 250 mm/s. Precise control with a sampling rate of at least 5 kHz, accuracy class 1/0.5, and modern digital interfaces (e.g., EtherCAT) is required. The supplier is responsible for integration with ETH’s existing servo-hydraulic power unit, including hydraulic design, safety concept, and valve system coordination. The mechanical structure must safely withstand high forces, provide a rigid frame, and allow for hydraulic crossbeam adjustment, with easy access for test specimen installation. Two bids were received for this contract.

Laboratorie- og analyseutstyr

Result

TED
  • EN_Walter + Bai AG
    Winner
  • Number of tenders received
    2
  • Contract value
    CHF 1,393,950

Previous winners

  • Who are you up against?

    The suppliers who have won similar contracts at ETH Zürich - Abt. Procurement & Export Services

Will you bid?

The agent sets up the bid and writes the first draft. Free for 14 days.

Award Criteria

  • Description

    Award criteria

    Source

    No source found in the documents. Check the weight against the tender documents.

From the notice

  • The Department of Steel and Composite Structures at ETH Zurich is planning to procure a new universal testing machine for the construction hall at the Hönggerberg site. The equipment is intended to test large-scale components under realistic static and dynamic loads, thereby supporting future research in steel, composite and earthquake engineering. The main applications include “centric and eccentric compression tests […] with the optional ability to apply tensile forces”. The project is being led by Dominik Werne, Head of the Construction Hall. The machine must provide a spacious test chamber capable of accommodating test specimens up to “B: 1500 mm, H: 1500 mm, L: 5000 mm”. Clamping heights ranging from 500 to 5000 mm allow for both compression and tensile tests. The test chamber must be fully visible to enable the use of optical measurement systems such as DIC. The hydraulic system comprises a vertical cylinder with “10 MN compressive load, 6 MN tensile load and 400 mm cylinder stroke”, as well as two horizontal cylinders, each with “1 MN compressive/tensile load and 500 mm cylinder stroke”. The system must be capable of dynamic tests up to 10 Hz and speeds of up to 250 mm/s. Precise control with a sampling rate of at least 5 kHz, accuracy class 1/0.5 and modern digital interfaces (e.g. EtherCAT) is required to support force- and strain-controlled tests as well as hybrid testing. The test rig will be connected to ETH’s existing servo-hydraulic power unit. The supplier will provide “all necessary support for proper integration”, including hydraulic design, a safety concept and coordination of the valve system. The mechanical structure must safely withstand extremely high forces, provide a rigid frame construction and allow for hydraulic crossbeam adjustment. At the same time, easy access for the installation of test specimens must be ensured, as emphasised in the document: “Access should be as easy as possible […].” Assembly will take place in test hall HIF C 51. Delivery will be via HIF C 54, delivery point 27. The components will be delivered by lorry and transported using the hall cranes. Both cranes have a lifting capacity of 10 t each, a maximum hook height of 7.4 m and a minimum hook spacing of 8 m. Due to work being carried out in parallel, the operating time is limited to 3–4 hours. Furthermore: “The hall cranes may only be operated by the contractor’s trained personnel.” The floor load is limited to 10 kN/m² in the handling area and 7 kN/m² in parts of the hall, supplemented by permissible wheel loads of 135 kN over an area of 0.4 m × 0.4 m. The contractor shall provide at least one tool container for the site facilities; staff rooms will not be provided, but toilets will be. A voluntary site visit will enable tenderers to familiarise themselves with the site layout, though no questions relating to the tender procedure will be answered. For further details, please refer to the specifications and annexes.

  • Contact

    publictender@ethz.ch
  • Type
    Result
  • Location
    Zürich
  • Main code
    Checking and testing apparatus
    38500000
  • 38000000Laboratory, optical and precision equipments (excl. glasses)

Similar active competitions

  • ETH Zürich - Abt. Procurement & Export Services

    X-ray CT system for the analysis of rock and soil samples

    ETH Zürich - Abt. Procurement & Export Services needs an X-ray CT system for the non-destructive in-situ multi-phase characterisation of heterogeneous rock and soil samples, concrete cores, and other porous materials. The system will be delivered to Zürich. The award criteria are based on quality.

    Competition
    Nov 25, 2026(3 days)
  • Tartu Ülikool

    Laboratorie- og analyseutstyr

    Elektromehaanilise universaalse materjalide katseseadme ostmine

    Tartu Ülikool ostab Lõuna-Eestisse elektromehaanilise universaalse materjalide katseseadme, mille tehnilised nõuded on esitatud hanke alusdokumentide lisas; tarne- ja lepingu täitmise periood on 3 kuud. Pakkumusi hinnatakse hinna (87,5%) ja kvaliteedi (12,5%) alusel.

    Competition
    Dec 11, 2026(19 days)
  • ΑΡΙΣΤΟΤΕΛΕΙΟ ΠΑΝΕΠΙΣΤΗΜΙΟ ΘΕΣΣΑΛΟΝΙΚΗΣ

    ΔΙΕΘΝΗΣ ΗΛΕΚΤΡΟΝΙΚΟΣ ΔΙΑΓΩΝΙΣΜΟΣ ΑΝΟΙΚΤΗΣ ΔΙΑΔΙΚΑΣΙΑΣ ΜΕΣΩ ΕΣΗΔΗΣ ΓΙΑ ΤΗΝ "ΠΡΟΜΗΘΕΙΑ ΚΑΙ ΕΓΚΑΤΑΣΤΑΣΗ ΕΠΙΣΤΗΜΟΝΙΚΟΥ ΕΞΟΠΛΙΣΜΟΥ ΤΟΥ ΕΡΓΑΣΤΗΡΙΟΥ ΜΕΤΑΛΛΙΚΩΝ ΚΑΤΑΣΚΕΥΩΝ ΤΟΥ ΤΜΗΜΑΤΟΣ ΠΟΛΙΤΙΚΩΝ ΜΗΧΑΝΙΚΩΝ ΤΟΥ ΑΠΘ " (ΑΡΙΘΜΟΣ ΔΙΑΚΗΡΥΞΗΣ 740/2026)

    Το ΑΡΙΣΤΟΤΕΛΕΙΟ ΠΑΝΕΠΙΣΤΗΜΙΟ ΘΕΣΣΑΛΟΝΙΚΗΣ χρειάζεται την προμήθεια και εγκατάσταση επιστημονικού εξοπλισμού για το εργαστήριο Μεταλλικών Κατασκευών του Τμήματος Πολιτικών Μηχανικών του ΑΠΘ, στη Θεσσαλονίκη. Η σύμβαση, συνολικής εκτιμώμενης αξίας 796.306,05 € (χωρίς ΦΠΑ), υποδιαιρείται σε έξι τμήματα με διαφορετικές διάρκειες: 10 μήνες για το Τμήμα 1, 8 μήνες για τα Τμήματα 2, 3, 4 & 6, και 20 μήνες για το Τμήμα 5. Ο εξοπλισμός περιλαμβάνει σερβο-υδραυλικά συστήματα, καθολική μηχανή δοκιμής στατικών φορτίσεων, σεισμική τράπεζα, σύστημα υποστήριξης τεχνικής συσχέτισης ψηφιακών εικόνων, διάταξη δοκιμής κουφωμάτων και μεταλλικό πλαίσιο στήριξης. Η ανάθεση θα γίνει με κριτήριο την πλέον συμφέρουσα από οικονομική άποψη προσφορά βάσει της βέλτιστης σχέσης ποιότητας-τιμής, με στάθμιση 70% στις τεχνικές προδιαγραφές, 15% στον χρόνο εγγύησης καλής λειτουργίας και 15% στην τεχνική υποστήριξη. Απαιτείται ετήσιος κύκλος εργασιών τουλάχιστον 30% του προϋπολογισμού του τμήματος/τμημάτων για τα έτη 2023, 2024, 2025, κατάλληλες τραπεζικές βεβαιώσεις πιστοληπτικής ικανότητας ύψους τουλάχιστον 30% του προϋπολογισμού του τμήματος/τμημάτων, κατάλληλα εκπαιδευμένο προσωπικό για την εκπαίδευση στη χρήση του εξοπλισμού, κατάλογος των κυριότερων παραδόσεων της τριετίας 2023-2025 για συναφή είδη, και πιστοποίηση ISO 9001:2015 ή ισοδύναμο για θέματα προμήθειας εξοπλισμού.

    Competition
    Nov 30, 2026(8 days)
    €796,306