Eliteform-Project-2026-4 Roll plate Bending Machine
Expired
The competition has expired without a winner being announced.
- Deadline
- Apr 17,Expired
- Procedure
- OpenSingle stage
Brief
Eliteform Manufacturing Ltd needs a heavy-duty 4-roll hydraulic plate rolling machine for industrial forming of mild steel, aluminium, and stainless steel plates, with a maximum total value of 120,000 EUR. The machine must be capable of precision rolling plates up to 4.0 mm mild steel and 3.0 mm stainless steel, with a maximum working length of 4000 mm, and a maximum roll rotation speed of 6 metres per minute. It should be designed for continuous industrial production with high precision, repeatability, and long service life, including pre-bending on both ends, rolling cylindrical and conical sections, and producing uniform diameters. The machine must be equipped with a Dynamic Crowning system to automatically deflect the bottom roll upward and clamp the plate, reducing defects and improving diameter consistency. All components must comply with relevant CE and machinery safety standards, and the supplier must provide full technical documentation, machine layout and foundation drawings, hydraulic and electrical schematics, and operator and maintenance manuals. The contract duration is 1 month.
Industrimaskiner
Previous winners
Who are you up against?
The suppliers who have won similar contracts at Eliteform Manufacturing Ltd
Will you bid?
The agent sets up the bid and writes the first draft. Free for 14 days.
From the notice
Eliteform Manufacturing Ltd invite tenders for the supply of a heavy-duty 4-roll hydraulic plate rolling machine for industrial forming of mild steel, aluminium and stainless steel plates. The machine shall be capable of precision rolling of plates up to: • 4.0 mm mild steel • 3.0 mm stainless steel • Maximum working length: 4000 mm The machine shall be designed for continuous industrial production with high precision, repeatability, and long service life. Requirments; • The top and bottom rolls shall be: o Fully motorised o Driven through heavy-duty gearboxes and hydraulic motors • The side rolls shall be guided by a planetary guide movement system to ensure: o Accurate positioning o Uniform load distribution o Long bearing life • All rolls shall be mounted using double-crown spherical roller bearings in single-bearing configuration per roll. o Configurations using two separate single-crown bearings per roll are not acceptable, due to: Higher mechanical stress Reduced rigidity Lower performance when rolling narrow plates • Roll movements shall be actuated by hydraulic cylinders in a parallel system configuration. • Each cylinder shall be controlled through independent hydraulic circuits to guarantee: o Accurate parallelism of rolls o Uniform pressure distribution o High rolling precision Performance Requirements • Maximum plate thickness: o 4.0 mm mild steel o 3.0 mm stainless steel • Maximum working length: 4000 mm • Maximum roll rotation speed: 6 metres per minute • The machine shall be capable of: o Pre-bending on both ends o Rolling cylindrical and conical sections o Producing uniform diameters across full length Crowning and Deflection Compensation • The machine shall be equipped with Dynamic Crowning system. • The system shall automatically: o Deflect the bottom roll upward to match top roll deflection o Clamp the plate across its entire working width • The crowning system shall: o Reduce or eliminate canoeing / barrel defects o Improve diameter consistency along the full length o Increase the effective rolling thickness range o Enhance rolling accuracy for both narrow and wide plates General Requirements • Machine shall be designed for: o Heavy industrial duty o Long service life o High dimensional accuracy • All components shall comply with relevant CE and machinery safety standards. • Supplier shall provide: o Full technical documentation o Machine layout and foundation drawings o Hydraulic and electrical schematics o Operator and maintenance manuals
Contact
martin@eliteform.ie- CompetitionType
- Mid-EastLocation
- 42633000Main codeBending, folding, straightening or flattening machines