Find

  • All tenders
Germany: Tenders/Hydrogen Import Terminal Wilhelmshaven GmbH/Green Wilhelmshaven Terminal preFEED

Green Wilhelmshaven Terminal preFEED

Published deadline passed

The published deadline has passed. For multi-stage competitions a later tender deadline may still apply — check the notice or portal for the current phase.

Qualification deadline
Sep 2, 2024Expired
Procedure
With negotiationTwo stages
Agreement
Buying services
Estimated value
€0over 6 months

Brief

Development of technical designs, cost estimates and schedules for the planned NH3-Terminal in Wilhelmshaven.

Rådgivende ingeniørtjenester for bygg og anlegg

Register interest

Previous winners

  • Who are you up against?

    The suppliers who have won similar contracts at Hydrogen Import Terminal Wilhelmshaven GmbH

Will you bid?

The agent sets up the bid and writes the first draft. Free for 14 days.

Qualification requirements

  • Description

    Declaration of the applicant consortium (if applicable)

    Documentation Requirement

    Form I: Declaration of the applicant consortium (if applicable)

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Self-declaration on reliability

    Documentation Requirement

    Form II: Self-declaration on reliability

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Declaration on Section 19 (3) MiLoG

    Documentation Requirement

    Form III: Declaration on Section 19 (3) MiLoG

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Declaration of commitment of the third party to Suitability loan of the technical and professional capacity (if applicable)

    Documentation Requirement

    Form X: Declaration of commitment of the third party to Suitability loan of the technical and professional capacity (if applicable)

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Sanctions - self-declaration on the lack of reference to Russia

    Documentation Requirement

    Form XII: Sanctions - self-declaration on the lack of reference to Russia

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Current excerpt from the commercial register

    Documentation Requirement

    Current excerpt from the commercial register

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Professional Indemnity (PI) insurance with a limit of not less than EUR 10 Mio. per claim and in the annual aggregate.

    Documentation Requirement

    Form IV: Declaration on Business, Product and Environmental Liability Insurance

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Third Party Liability, Product and Pollution insurance with following limits: 2,500,000 EUR insured per insured event for bodily injury. 2,500,000 EUR insured per insured event for property damage. 1,000,000 EUR insured per insured event for consequential property damage. The maximization of the replacement benefits shall be at least 2 times the namend insured sums per year.

    Documentation Requirement

    Form IV: Declaration on Business, Product and Environmental Liability Insurance

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The minimum requirement is an average total annual turnover over the last three (3) financial years of > € 3 million in the area of Engineering Services.

    Documentation Requirement

    Form V: Declaration of turnover according to the following requriements

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Declaration of commitment of the third party to Suitability loan of the economic and financial capacity (if applicable)

    Documentation Requirement

    Form XI: Declaration of commitment of the third party to Suitability loan of the economic and financial capacity (if applicable)

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Confirmation that all items of the scope as described in the scope of work and listed in price sheet can be delivered (delivery capacity and delivery competence).

    Documentation Requirement

    Form V: Confirmation that all items of the scope as described in the scope of work and listed in price sheet can be delivered (delivery capacity and delivery competence).

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Adherence to the provided price sheet which requires a lump sum fixed price for the pre-FEED Study as part of this tendering process.

    Documentation Requirement

    Form V: Adherence to the provided price sheet which requires a lump sum fixed price for the pre-FEED Study as part of this tendering process.

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Establishment and maintenance of a quality management system in accordance with the EN ISO 9001 standard or equivalent.

    Documentation Requirement

    Proof (certificate) of the establishment and maintenance of a quality management system in accordance with the EN ISO 9001 standard or equivalent.

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    Establishment and maintenance of an occupational health and safety management system, such as OHSAS18001 or equivalent to the ISO 45001 standard or equivalent.

    Documentation Requirement

    Explanation of the establishment and maintenance of an occupational health and safety management system, such as OHSAS18001 or equivalent to the ISO 45001 standard or equivalent.

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The minimum required number of permanent employees is an average of 70 or more in the last three (3) completed financial years.

    Documentation Requirement

    Form VI: Self-declaration on the company

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The minimum required number of permanent engineers employed is an average of 50 or more in the last three (3) completed financial years.

    Documentation Requirement

    Form VI: Self-declaration on the company

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The participant confirms the acknowledgement of and compliance with the Uniper Code of Conduct and the HSSE-Sustainability Policy Statement.

    Documentation Requirement

    Form VI: Self-declaration on the company

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The candidate must provide at least three (3) references for the execution of services that are comparable to the services to be awarded. Comparable services are those which consider industrial-scale applications for petrochemical substances or gas applications, such as terminals, import facilities, LPG-/LNG-/Ammonia-applications, and have been carried out as pre-FEED, or FEED, basic engineering, or detail engineering.

    Documentation Requirement

    Form VII: Self-declaration company references according to below requirements: A

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The candidate has to provide at least one (1) reference according to which it has completed at least one basic engineering, detail engineering, pre-FEED, FEED, design planning, approval planning or implementation planning of a rail tank car loading or offloading station for ammonia or at least a comparable media with regards to design of the loading facilities. The reference project location is within the European Union and the planning carried out takes into account all relevant European norms and standards. The reference described here can be an integral part of references under A) or C).

    Documentation Requirement

    Form VII: Self-declaration company references according to below requirements: B

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The candidate must provide at least one (1) reference according to which it has completed at least one basic engineering, detail engineering, pre-FEED, or FEED for an industrial scale ammonia application comparable to the Design Scope as described in the Scope of Work or at least comparable to one or more key major elements or areas of the requested Design Scope. The reference project location is within the European Union and the planning carried out takes into account all relevant European norms and standards. The reference described here can be an integral part of references under A), B) or D).

    Documentation Requirement

    Form VII: Self-declaration company references according to below requirements: C

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The candidate must provide at least one (1) reference to proof relevant experience at the interface to marine aspects and marine shipping. Relevant experience can e.g. be basic engineering, detail engineering, pre-FEED or FEED for loading and/or unloading topsides on jetties or other harbour infrastructure for transfer of gases, liquefied gases, or petrochemical substances. The reference described here can be an integral part of references under A) or C).

    Documentation Requirement

    Form VII: Self-declaration company references according to below requirements: D

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The value of the bidder's own work (excluding subcontractors) in relation to references according to A) and C) must be more than €500,000 (gross). If the service was provided as part of a partnering or joint venture, the bidder's share of the service must be more than 50%.

    Documentation Requirement

    Form VII: Self-declaration company references according to below requirements: E

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    The references must not be older than ten (10) years and must contain the following minimum information: Project description, Execution period, scope of services (Design Scope and Scope of Work), client, contact person (by name with contact details, in particular telephone number), Contract value (with additional statement of bidder’s part of the contract volume, if JV or subcontract).

    Documentation Requirement

    Form VII: Self-declaration company references according to below requirements: F

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    For the appointment of a subcontractor without a subcontracting agreement, the candidate must additionally submit for each subcontractor: all the documents listed under section III. 1.1 of the EU-wide notice (i.e. forms I, II, III, X, XII and extract from the commercial register) as proof of the subcontractor's reliability and compliance with the law.

    Documentation Requirement

    Form XI: List of subcontractors and qualifying lenders according to below requirements: Case 1

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    For the designation of a company as a subcontractor with a subcontracting agreement on the basis of technical and/or professional capacity, the candidate must additionally submit: (i) the documents specified in Section III. 1.3 of the EU-wide notice for this third party to the extent that the candidate relies on the capacities of the third party to prove capacity (i.e. Forms V, VI, VII, XI), (ii) the documents listed in Section III. 1.1 of the EU-wide notice, in each case all also from this designated third party (i.e. Forms I, II, III, XII and extract from the commercial register), (iii) a declaration of commitment from the subcontractor using Form X.

    Documentation Requirement

    Form XI: List of subcontractors and qualifying lenders according to below requirements: Case 2

    Source

    No source found in the documents. Check the requirement against the tender documents.

  • Description

    For the designation of a company as the Qualifying Lender with regard to economic and financial capacity, the candidate must additionally submit: (i) Form V in accordance with Section III. 1.2 of the EU-wide notice, (ii) the documents listed under Section III. 1.1 of the EU-wide notice, in each case all from the Qualifying Lender (i.e. Forms I, II, III, XII and extract from the commercial register), (iii) a declaration of commitment from the subcontractor using Form XI.

    Documentation Requirement

    Form XI: List of subcontractors and qualifying lenders according to below requirements: Case 3

    Source

    No source found in the documents. Check the requirement against the tender documents.

From the notice

  • Development of technical designs, cost estimates and schedules for the planned NH3-Terminal in Wilhelmshaven.

  • Contact

    elena.temborius1@uniper.energy
  • Type
    Competition · Prequalification
  • Location
    Düsseldorf, Kreisfreie Stadt
  • Main code
    Miscellaneous engineering services
    71330000

Similar active competitions

  • Niedersachsen Ports GmbH & Co. KG

    Prosjekteringstjenester

    Errichtung Multipurpose-Terminal (MPT) im Bereich JadeWeserPort Wilhelmshaven– Los 1 (techn. Planer)

    Niedersachsen Ports GmbH & Co. KG benötigt über 3 Jahre technische Planungsleistungen für die Errichtung eines rund 900 Meter langen Multipurpose-Terminals im JadeWeserPort in Wilhelmshaven. Der Auftrag umfasst Objektplanung für Ingenieurbauwerke, Tragwerksplanung sowie die Planung von Gründung, Baugrundverbesserung und Flächenherstellung; vorgesehen sind eine Kaianlage, Terminal- und Umschlagflächen, eine RoRo-Anlage, die Anbindung an die bestehende Hafeninfrastruktur sowie der Rückbau und Neubau eines Schlepperhafens mit 20 Liegeplätzen. Für die Eignung sind Referenzen aus den letzten 10 Jahren erforderlich: mindestens je eine vergleichbare Referenz in Objektplanung und Tragwerksplanung für Großschiffsliegeplätze im tideabhängigen Bereich, darunter BIM-Planung eines Wasserbauwerks; außerdem Referenzen zu Nassbaggerungen beziehungsweise Aufspülungen zur Landgewinnung sowie zur Begleitung wasserrechtlicher Genehmigungsverfahren für vergleichbare Hafen- oder Wasserbauprojekte.

    Competition with qualification
    Nov 30, 2026(7 days)
  • Niedersachsen Ports GmbH & Co. KG

    Byggeteknisk konsulentvirksomhet

    Errichtung Multipurpose-Terminal (MPT) JadeWeserPort Wilhelmshaven– Los 4 Umweltfachliche Leistungen

    Niedersachsen Ports GmbH & Co. KG benötigt Umweltplanungsleistungen für das Multipurpose-Terminal am JadeWeserPort in Wilhelmshaven. Der Auftrag umfasst die landseitige Erfassung naturschutzfachlicher Grundlagen sowie die Erstellung der umweltfachlichen Genehmigungsunterlagen für ein wasserrechtliches Planfeststellungsverfahren und die umweltfachliche Begleitung des Verfahrens. Gefordert sind mindestens drei Referenzen zu vergleichbarer Bestandserfassung im deutschen Küstengebiet oder in der küstennahen Tiefebene, mindestens drei Referenzen zu Umweltgutachten für vergleichbare Ingenieurbau- und wasserbauliche Vorhaben sowie mindestens eine Referenz zur Begleitung wasserrechtlicher Zulassungsverfahren vergleichbarer Komplexität; die Referenzen müssen aus den letzten zehn Jahren stammen. Zudem muss die verantwortliche Fachperson zur Berufsbezeichnung Architekt oder Ingenieur beziehungsweise Beratender Ingenieur berechtigt sein.

    Competition with qualification
    Dec 18, 2026(25 days)
  • Niedersachsen Ports GmbH & Co. KG

    Kartlegging og geospatiale tjenester

    Errichtung Multipurpose-Terminal (MPT) JWP Wilhelmshaven– Los 5 (Seeseitige Bestandserfassung)

    Niedersachsen Ports GmbH & Co. KG benötigt für das Projekt Multipurpose-Terminal JadeWeserPort Wilhelmshaven seeseitige Bestandsaufnahmen naturschutzfachlicher Grundlagendaten und deren Aufbereitung für das wasserrechtliche Planfeststellungsverfahren. Die Leistungen betreffen Wilhelmshaven und umfassen insbesondere die methodengerechte Erfassung von Makrozoobenthos sowie Fischen und Rundmäulern in Nordsee-Ästuaren. Als Qualifikationsnachweis sind mindestens drei innerhalb der letzten zehn Jahre abgeschlossene, hinsichtlich Art, Umfang und Komplexität vergleichbare Referenzen erforderlich.

    Competition with qualification
    Dec 18, 2026(25 days)