Find

  • All tenders
Finland: Tenders/Turun yliopisto/Results - Revised Long-range aerial drone with heavy payload

Results - Revised Long-range aerial drone with heavy payload

Cancelled

The competition has been cancelled.

Deadline
Jun 23, 2024Expired
Award
Flight time, weight 10
Procedure
OpenSingle stage
Agreement
Buying goods
Estimated value
€300K

Brief

The contracting authorities intended to jointly buy: Long-range aerial drone (unmanned aerial vehicle (UAV)) with the following mandatory minimum requirements: - Complies with technical requirements in EASA PDRA-G01 and PDRA-G02 - Typical kinetic energy up to 34 kJ from 120 m altitude - Maximum characteristic dimension 3 m - Transport size less than 2 m in diameter - Payload should be over or equal 6 kg - The drone should be suitable for vertical take-off and landing. - The drone will be designed as a field mapping tool for the laser scanners, optical cameras, water quality/quantity sensors, etc. These kinds of instrumentation should be able to be attached onto the drone, occasionally more than one at a time. - Flight time with 6 kg payload should be at least 120 minutes - Minimum flight speed of the drone should be 5 m/s or less. Capability also to fly with up to 12 m/s flight speed or more. - Safety systems for landing (e.g. parachute) - Operation wind conditions, at least up to 12 m/s wind speed - Electric or hybrid motor; If not fully battery powered, must use fuel that is commonly available for purchase in rural areas - Remote control: radio control up to 15 km range. Option to be able to support longer range 30 km+ have to be offered this can be e.g. LTE link or a satellite C2 link. Also real-time video feed from drone to remote control have to be included. - Operating Temperature range at least -10 to 40C, - The drone should be equipped with a location positioning system (GNSS: GPS+GLONASS+BeiDou+Galileo). Options for RTK and VRS functions are required. - The Ingress protection rating must be at least IP45 at minimum. - Applications: Remote control software - Factory test prior to client´s acceptance of the delivery - Availability of maintenance and calibration services; Maintenance checks and possible calibrations of equipment shall be available, if needed, from the Supplier also after the warranty period has ended. Maintenance program, costs of the maintenance and maintenance program (done by user or company) should be specified. - The Supplier shall guarantee the availability of spare parts also after the warranty period has ended. - Training; At least one-day user training - must be a commercial product (not one-off custom unit for this tender). To ensure the maturity of the drone model offered, the manufacturer has produced at least 10 drones of the same model. Major components of these drones are identical. This procurement included mandatory options. Mandatory options must be offered and are: - Option to be able to support longer range 30 km+ have to be offered, this can be e.g. LTE link or a satellite C2 link - Maintenance program, costs of the maintenance and maintenance program (done by user or company) should be specified - Options for RTK and VRS functions

Lufttransport og ubemannede luftfartøy

Result

  • Reason for cancellation
    No tenders, requests to participate or projects were received
  • Number of tenders received
    0

Previous winners

  • Who are you up against?

    The suppliers who have won similar contracts at Turun yliopisto

Will you bid?

The agent sets up the bid and writes the first draft. Free for 14 days.

Award Criteria

  • Description

    Total price

    Source

    No source found in the documents. Check the weight against the tender documents.

  • Description

    Flight time with 6 kg payload at least 120 minutes 0 points Flight time with 6 kg payload at least 150 minutes 5 points Flight time with 6 kg payload at least 180 minutes 10 points

    Source

    No source found in the documents. Check the weight against the tender documents.

From the notice

  • The contracting authorities intended to jointly buy: Long-range aerial drone (unmanned aerial vehicle (UAV)) with the following mandatory minimum requirements: - Complies with technical requirements in EASA PDRA-G01 and PDRA-G02 - Typical kinetic energy up to 34 kJ from 120 m altitude - Maximum characteristic dimension 3 m - Transport size less than 2 m in diameter - Payload should be over or equal 6 kg - The drone should be suitable for vertical take-off and landing. - The drone will be designed as a field mapping tool for the laser scanners, optical cameras, water quality/quantity sensors, etc. These kinds of instrumentation should be able to be attached onto the drone, occasionally more than one at a time. - Flight time with 6 kg payload should be at least 120 minutes - Minimum flight speed of the drone should be 5 m/s or less. Capability also to fly with up to 12 m/s flight speed or more. - Safety systems for landing (e.g. parachute) - Operation wind conditions, at least up to 12 m/s wind speed - Electric or hybrid motor; If not fully battery powered, must use fuel that is commonly available for purchase in rural areas - Remote control: radio control up to 15 km range. Option to be able to support longer range 30 km+ have to be offered this can be e.g. LTE link or a satellite C2 link. Also real-time video feed from drone to remote control have to be included. - Operating Temperature range at least -10 to 40C, - The drone should be equipped with a location positioning system (GNSS: GPS+GLONASS+BeiDou+Galileo). Options for RTK and VRS functions are required. - The Ingress protection rating must be at least IP45 at minimum. - Applications: Remote control software - Factory test prior to client´s acceptance of the delivery - Availability of maintenance and calibration services; Maintenance checks and possible calibrations of equipment shall be available, if needed, from the Supplier also after the warranty period has ended. Maintenance program, costs of the maintenance and maintenance program (done by user or company) should be specified. - The Supplier shall guarantee the availability of spare parts also after the warranty period has ended. - Training; At least one-day user training - must be a commercial product (not one-off custom unit for this tender). To ensure the maturity of the drone model offered, the manufacturer has produced at least 10 drones of the same model. Major components of these drones are identical. This procurement included mandatory options. Mandatory options must be offered and are: - Option to be able to support longer range 30 km+ have to be offered, this can be e.g. LTE link or a satellite C2 link - Maintenance program, costs of the maintenance and maintenance program (done by user or company) should be specified - Options for RTK and VRS functions

  • Contact

    Jaakko Uotilakilpailutus@utu.fi
  • Type
    Result
  • Main code
    Unmanned aerial vehicles
    35613000
  • 31000000Electrical machinery, apparatus, equipment and consumables; lighting35000000Security, fire-fighting, police and defence equipment

Similar active competitions

  • Politechnika Poznańska

    Elektrisk utstyr og belysning

    Dostawa bezzałogowych statków powietrznych (BSP) wraz z wyposażeniem, konfiguracją, instruktażem stanowiskowym

    Politechnika Poznańska potrzebuje dostawy bezzałogowych statków powietrznych wraz z wyposażeniem, konfiguracją i instruktażem stanowiskowym; realizacja zamówienia w Poznaniu ma trwać 6 dni. Oferty będą oceniane pod kątem ceny (60%) oraz gwarancji (40%): za 24 miesiące gwarancji przyznawane są punkty, przy czym kryterium nie obejmuje akumulatorów.

    Competition
    Dec 9, 2026(17 days)
  • The Finnish Border Guard

    Micro-UAS Procurement v2

    The Finnish Border Guard seeks small unmanned aircraft systems (UAS) and related UAVs under a supply contract with an estimated maximum total value of €450,000; the contract duration is not specified. The systems will support statutory operations on land and at sea, including crime prevention, maritime rescue, special forces activities, searches for missing persons and support to other authorities, as well as research, training and communications. Operations must comply with Finnish aviation legislation and Border Guard requirements, including provisions relevant to the specific category of unmanned aviation. This is a restricted, multi-phase procedure: only selected candidates will be invited to tender, and technical field testing may take place at a location in Finland. Candidates must include brochures for their proposed systems, and the Border Guard may request a test system to verify compliance. Price and quality are the stated award criteria, with no weights specified.

    Competition with qualification
    Dec 28, 2026(36 days)
    €450,000
  • Tallinna Tehnikaülikool

    Laboratorie- og analyseutstyr

    Hüperspektraalne mõõtesüsteem

    Tallinna Tehnikaülikool vajab 4 kuu jooksul Põhja-Eestisse DJI Matrice 600 Pro drooniga ühilduvat terviklikku VNIR-hüperspektraalset mõõtesüsteemi, mille hanke maksimaalne kogumaksumus on 50 000 eurot. Süsteem peab võimaldama hüperspektraalsete kujutiste, asukoha- ja orientatsiooniandmete ning pealelangeva spektraalse kiirguse samaaegset registreerimist, samuti andmete radiomeetrilist korrigeerimist ja georeferentseerimist. Pakkumusi hinnatakse hinna alusel, mille osakaal on 100%.

    Competition
    Nov 23, 2026(1 day)
    €50,000