Find

  • All tenders
Germany: Tenders/TenneT TSO GmbH/TenneT Qualification System for Protection and Control Systems

TenneT Qualification System for Protection and Control Systems

Deadline
Jul 1, 2029952 days left
Agreement
Buying goods

Brief

TenneT TSO GmbH, based in Germany, is establishing a qualification system for the supply of Intelligent Electronic Devices (IEDs) used in protection and substation control technology within extra high-voltage and high-voltage substations. These devices are critical for the safe, reliable, and efficient operation of the transmission grid, and must adhere to internationally recognized substation communication protocols, primarily IEC 61850, with consideration for IEC 60870 5 103 and IEC 60870 5 104 where applicable. The qualification process seeks Economic Operators with proven expertise in the planning, production, implementation, and integration of such devices according to technical and regulatory requirements.

Elektrisk utstyr og belysning

Register interest

Previous winners

  • Who are you up against?

    The suppliers who have won similar contracts at TenneT TSO GmbH

Will you bid?

The agent sets up the bid and writes the first draft. Free for 14 days.

From the notice

  • TenneT TSO GmbH (hereinafter referred as TenneT) is the largest Transmission System Operator (TSO) in Germany (based on circuit length, installed capacity and size of operating zone as of 31 Decem-ber 2025). The company operates critical infrastructure that secures access to a reliable, sustainable and affordable electricity supply. TenneT is one of the largest investors in electricity grids on land and at sea in Germany. Located at the Northwest European energy crossroads, TenneT connects: North and South. Offshore and Onshore. Germany and Europe. With its approximately 5,000 employees the company builds, maintains and operates Germany's largest transmission grid with a length over 14,000 km connect-ing more than a third of the European Union’s total offshore wind capacity. Its growth is driven by a rapidly evolving electricity demand that requires a flexible and growing grid architecture. The scope of this prequalification procedure covers the supply of Intelligent Electronic Devices (IEDs) used in the areas of protection and substation control technology within extra high-voltage and high-voltage substations. These devices constitute key components of the secondary technology and are essential for ensuring the safe, reliable and efficient operation of the transmission grid. The technical requirements are based on internationally recognized substation communication protocols commonly applied in the automation and operation of electrical power systems. The primary focus of the TQS is on IEC 61850, while other relevant protocols, such as IEC 60870 5 103 and IEC 60870 5 104, are also considered where applicable. This prequalification process aims to identify Economic Operators with proven expertise in the planning, production, implementation and integration of such devices in accordance with applicable technical and regulatory requirements. Candidates receive qualification status for each of their own production sites and each technical lot. The successful completion of the qualification process depends on various factors beyond TenneT’s control. TenneT can only commit to the processing time for the individual gates. The time required to complete the questionnaires and provide the necessary documentation is the sole responsibility of the participating Economic Operators.

  • Contact

    Daniel Simondaniel.Simon@tennet.eu
  • Type
    Competition
  • Main code
    Electrical apparatus for switching or protecting electrical circuits
    31210000
  • 31682540Substation equipment48921000Automation system

Similar active competitions

  • TenneT TSO GmbH

    Elektrisk utstyr og belysning

    TenneT Qualification System for Protection and Control Systems

    TenneT TSO GmbH, based in Germany, is establishing a qualification system for the supply of Intelligent Electronic Devices (IEDs) for protection and substation control technology within extra high-voltage and high-voltage substations. These devices are critical for the safe, reliable, and efficient operation of the transmission grid, and the technical requirements are based on internationally recognized substation communication protocols, primarily IEC 61850, with consideration for IEC 60870-5-103 and IEC 60870-5-104. The qualification process seeks Economic Operators with proven expertise in the planning, production, implementation, and integration of such devices according to applicable technical and regulatory requirements.

    Qualification system
    Jul 7, 2029(100+ days)
  • TenneT TSO GmbH

    Bygningsarbeid og installasjoner

    TenneT Qualifizierungssystem für Elektro-Montage Umspannwerke 110 - 380 kV

    Das vorliegende Verfahren dient der Qualifizierung von Lieferanten für E-Montageleistungen in Umspannwerken 110 - 380 kV und der Deckung künftiger Bedarfe der TenneT TSO GmbH. Alle Unterlagen dieses Qualifizierungssystems sind Eigentum des Auftraggebers. Die genannte Dokumentation ist nur für den Zweck der Angebotserarbeitung zu verwenden. Diese unterliegt der Geheimhaltung. Veröffentlichung, Vervielfältigung und Weitergabe dieser Dokumente an Dritte, auch auszugsweise, ist nur mit vorheriger schriftlicher Genehmigung der Auftraggeber zulässig. Das Qualifizierungssystem umfasst zwei separate Fragebögen, die jeweils auf unterschiedliche Qualifizierungsstufen abzielen. Der erste Fragebogen dient der Basisqualifizierung und bezieht sich auf ausgewählte Tätigkeiten im Schaltanlagenbau, wobei grundlegende Fähigkeiten und Kenntnisse geprüft werden. Der zweite Fragebogen ist für die erweiterte Qualifizierung konzipiert und deckt alle Tätigkeiten im Schaltanlagenbau ab, um sicherzustellen, dass die Mitarbeiter umfassend auf komplexere Aufgaben und Herausforderungen vorbereitet sind. Beide Fragebögen gewährleisten eine gezielte Entwicklung der Fachkompetenzen entsprechend der jeweiligen Anforderungen. Im Qualifizierungssystem muss lediglich einer der beiden Fragebögen beantwortet werden, abhängig von den spezifischen Anforderungen und dem angestrebten Qualifikationsniveau. Jeder Bewerber muss die beigefügte Geheimhaltungsvereinbarung (NDA) ausgefüllt und unterzeichnet an nachfolgende E-Mail Adressen nick.mertins@tennet.eu sowie lorene.klose@tennet.eu senden. Erst nach Übermittlung der ausgefüllten und unterzeichneten Geheimhaltungsvereinbarung (siehe Anhang) kann eine Einladung zum Qualifizierungssystem erfolgen. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- By this qualification system suppliers for e-installation stations 110 - 380 kV will be qualified. All information´s and documents of this qualification system shall remain the property of the customer. The applicant shall be obliged to exclusively use the Confidential Information in connection with the qualification system and not for other purposes. All Confidential Information shall be treated strictly confidentially by the applicant and must not be made accessible to anybody. The qualification system includes two separate questionnaires, each aimed at different qualification levels. The first questionnaire is used for basic qualification and is aimed at selected activities in switchgear construction, where fundamental skills and knowledge are tested. The second questionnaire is designed for advanced qualification and covers all activities in switchgear construction to ensure that employees are fully prepared for more complex tasks and challenges. Both questionnaires ensure targeted development of professional skills according to the respective requirements. Only one of the two questionnaires needs to be answered in the qualification system, depending on the specific requirements and the desired level of qualification. You have to download die attached NDA, fill it and send it signed to nick.mertins@tennet.eu and lorene.klose@tennet.eu Afterwards you will receive the invitation to this qualification System.

    Qualification system
    Nov 28, 2027(100+ days)
  • TenneT TSO GmbH

    TenneT Qualification System (TQS) Gas-insulated switchgear (GIS)

    This qualification system is being introduced in order to be able to tender for several (project or framework) agreements for gas-insulated metal-enclosed switchgear (GIS) for 145 kV and 420 KV for TenneT TSO GmbH in Germany over the next few years. TenneT values the confidentiality of all provided information and documents in this qualification system. For this matter TenneT requires from a Candidate a signed version of the attached NDA. The Candidate is requested to forward the signed version to the contact person of TenneT as stated in the most recent TED-Notice: dennis.halbauer@tennet.eu

    Qualification system
    Jul 25, 2028(100+ days)