Search
  • Search


Denmark: Tenders/Danmarks Tekniske Universitet - DTU/Contactless instrument for automated measurement of viscosity, density and surface tension of coating formulations in a robotic workflow
  1. Supplier selection

    Nov 17, 12:00 AMNovember 17, 2026 12:00 AM
  2. Result notice published

    Nov 17, 12:02 PMNovember 17, 2026 12:02 PM

Brief

Contactless instrument for automated measurement of viscosity, density and surface tension of coating formulations in a robotic workflow

Procedure
Without prior noticeTwo stages
Agreement
Buying goodsover 1 year

Brief

Danmarks Tekniske Universitet (DTU) has awarded Puform a 1-year contract to supply one laboratory instrument for measuring the dynamic viscosity, density and surface tension of liquid coating formulations at DTU in the Copenhagen area. The instrument must measure all three properties contactlessly and directly in the original mixing cups, handle samples ranging from opaque, highly pigmented viscous paints to transparent liquids with viscosity as low as water, and integrate with DTU’s robotic workflow through robot-compatible cup handling and a documented API for starting measurements and retrieving results.

Laboratorie- og analyseutstyr

Result

TED
  • Puform
    Winner
  • Number of tenders received
    0
  • Contract value
    €40,000

Custom Assessment Criteria

  • Get answers to your bid/no-bid criteria

    Set them up once and Cobrief answers them in every tender

Will you bid?

The agent sets up the bid and writes the first draft. Free for 14 days.

Previous winners

  • Who are you up against?

    The suppliers who have won similar contracts at Danmarks Tekniske Universitet - DTU

From the notice

  • DTU Chemical and Biochemical Engineering is acquiring one (1) laboratory instrument for the automated determination of dynamic viscosity, density and surface tension of liquid coating formulations (paints, lacquers, clear coats and their liquid precursors). The instrument will be integrated as a measuring station in DTU’s existing robotic, fully automated workflow, in which coating formulations are dispensed, mixed and characterised without manual intervention. The instrument must fulfil all of the following requirements: (1) Contactless measurement: viscosity, density and surface tension must be determined without any part of the instrument entering or touching the sample. (2) In-container measurement: the measurement must take place directly in the original mixing cups used in the workflow, without transferring, sub-sampling, diluting or otherwise preparing the sample, so that the cup is the only item in contact with the sample and no cleaning is required between measurements. (3) All three properties (viscosity, density and surface tension) must be measured by one instrument in one station. (4) Sample range: the instrument must work both for highly pigmented, opaque and viscous paints and for transparent, low-viscosity liquids down to the viscosity of water. (5) Automation compatibility: the cups must be loadable and unloadable by a robot arm, and the instrument must provide a documented software interface (API) allowing DTU’s workflow software to start measurements and retrieve results without manual steps.

  • Contact

    Laura Aagaardlplaa@dtu.dk
  • Type
    Result · Prequalification
  • Location
    Københavns omegn
  • Main code
    Laboratory, optical and precision equipments (excl. glasses)
    38000000
  • 38300000Measuring instruments38400000Instruments for checking physical characteristics38420000Instruments for measuring flow, level and pressure of liquids and gases38425000Fluid mechanics equipment38425200Viscosimeters38425700Surface tension measuring instruments38425800Densitometers38428000Rheometers38540000Machines and apparatus for testing and measuring

Similar active competitions

  • Danmarks Tekniske Universitet - DTU

    Laboratorie- og analyseutstyr

    Robot-compatible automatic film applicator

    Danmarks Tekniske Universitet (DTU) needs a robot-compatible automatic film applicator for the reproducible preparation of thin films from coatings, silicone elastomers, and polymer formulations on suitable substrates, with a maximum total value of 80,000 EUR. The procurement includes the supply, delivery, installation, setup, and commissioning of the system. The equipment must allow controlled adjustment of coating parameters like application speed and film thickness, be suitable for formulations up to 50g (including highly viscous liquids and pastes), and be integrable into automated robotic workflows with remote control and monitoring via a documented interface. The supply must include all necessary hardware, software, holders, adapters, safety components, and accessories for both manual and automated operation.

    Competition€80,000
  • Danmarks Tekniske Universitet - DTU

    Laboratorie- og analyseutstyr

    Procurement of an Automated Cell Counting System for Research

    Danmarks Tekniske Universitet (DTU) needs an automated fluorescence-based cell counting system for research, with a maximum total contract value of DKK 350,000. The system must support automated cell counting and viability analysis using both brightfield and fluorescence methods, and handle high-throughput analysis of large sample series.

    CompetitionDKK 350,000
  • Danmarks Tekniske Universitet - DTU

    Laboratorie-, optisk- og presisjonsutstyr

    Purchase of Flow Cytometer

    Danmarks Tekniske Universitet - DTU needs to purchase a Benchtop Flow Cytometer with a maximum total value of 185,000 EUR. The instrument should be a benchtop research-use flow cytometry cell analyzer suitable for multicolor immunophenotyping, basophil activation testing, rare-event analysis, plate-based acquisition, and future development of complex immune-cell assays. It must support robust analysis of human and animal research samples, including low-frequency immune-cell populations and activation-marker readouts.

    Competition€185,000