Search
  • Search


Finland: Tenders/VTT Technical Research Centre of Finland Ltd/Plasma etch cluster tool
  1. Result notice published

    Oct 28, 12:20 PMOctober 28, 2026 12:20 PM
  2. Contract start date

    Nov 16, 12:00 AMNovember 16, 2026 12:00 AM

Brief

Plasma etch cluster tool

Procedure
Without prior noticeTwo stages
Agreement
Buying goods

Brief

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY has awarded LAM Research a direct agreement to supply an advanced plasma etch cluster tool for research, development and pilot-line processing of metal, dielectric and other thin-film layers on 200 mm silicon wafers in Finland. The production-reliable system must support at least four process chambers and three load ports, advanced chamber cleaning and conditioning, atomic layer etching and pulsed-bias processing, and dual-zone controls to optimise etch uniformity. VTT identified LAM Research as the only supplier meeting all mandatory technical requirements.

Result

TED
  • LAM Research
    Winner
  • Number of tenders received
    0
  • Contract value
    Not stated

Custom Assessment Criteria

  • Get answers to your bid/no-bid criteria

    Set them up once and Cobrief answers them in every tender

Will you bid?

The agent sets up the bid and writes the first draft. Free for 14 days.

Award Criteria

  • Description

    Price

    Source

    No source found in the documents. Check the weight against the tender documents.

Previous winners

  • Who are you up against?

    The suppliers who have won similar contracts at VTT Technical Research Centre of Finland Ltd

From the notice

  • The object of the procurement is an advanced plasma etch cluster tool to etch metal and thin film layers from 200 mm silicon wafers, as used in the Semiconductor industry. VTT expects a reliable production-worthy tool. The tool should have the capacity for at least four process chambers and other features, which are described below. DIRECT AWARD, Article 40 2(2) of Finnish Procurement act (1397/2016) The procurement will be carried out as a direct award in accordance with 40 article Section 2(2) of the Finnish Public Procurement Act. According to the 40 § section 2(2) of the Act on Public Contracts (1397/2016), only a certain supplier can implement the procurement for a technical reason, or for a reason related to protecting an exclusive right; it shall be a further condition that there are no reasonable alternatives or substitute solutions, and that the absence of competition is not due to an artificial narrowing of the terms and conditions of the procurement. VTT is acquiring an advanced plasma etch cluster tool for the etching of metal, dielectric and other thin-film layers on 200 mm semiconductor wafers. The equipment will support a broad range of research, development and pilot-line processes, including metal and high-k material etching. A single cluster platform is required to provide production-level process reliability, uniformity and reproducibility while retaining the process flexibility required in a research and technology organisation. The tool configuration is based on the technical needs arising from the intended use. The mandatory capabilities include: (i) advanced chamber cleaning and conditioning, comprising waferless cleaning between process wafers and cleaning or passivation with cover wafers for materials that form less volatile by-products; (ii) a wide process-power range and etch-rate tunability through atomic layer etching (ALE), low-voltage pulsed-bias etching and steady-state processing; (iii) dual-zone chuck heating and dual-zone coil or power control for optimisation of within-wafer etch uniformity; and (iv) at least three load ports and a cluster architecture capable of supporting at least four process chambers. These capabilities are required to control crosscontamination, stabilise sensitive processes, process materials with different volatility and thickness characteristics, and avoid the cluster becoming a capacity bottleneck as additional process chambers are introduced. VTT conducted a market survey to identify suppliers of advanced etch cluster systems for semiconductor processing. The survey included direct discussions with tool manufacturers, technical evaluation of available solutions and a review of publicly available product information. Based on the market survey, LAM Research is the only identified supplier whose solution meets all mandatory technical requirements simultaneously. In particular, the LAM 2300 platform with Kiyo 45 and MW strip chambers provides the required combination of chamber waferless-clean and passivation capability, broad power-range and advanced pulsed or ALE processing, uniformity-tuning capability, and the required load-port and cluster expandability. The other evaluated solutions did not meet one or more of these mandatory requirements or the availability of the required capability could not be established. No reasonable alternative or substitute solution was identified that could meet the procurement need as a whole. The mandatory requirements derive directly from VTT's intended processes, contamination-control needs, uniformity and reproducibility targets, and capacity and expandability requirements. They have not been defined to favour a particular supplier or to artificially restrict competition. The contracting authority therefore concludes that the procurement can be implemented only by LAM Research for technical reasons and that the conditions for a direct award pursuant to Section 40, subsection 2, point 2 of the Finnish Procurement Act are fulfilled.

  • Contact

    TEKNOLOGIAN TUTKIMUSKESKUS VTT OYkilpailutus@vtt.fi
  • Type
    Result · Prequalification
  • Main code
    Laboratory, optical and precision equipments (excl. glasses)
    38000000

Similar active competitions

  • Danmarks Tekniske Universitet - DTU

    Delivery and installation of a ICP Reactive ion etcher for silicon dielctrics

    Danmarks Tekniske Universitet - DTU needs an ICP Reactive ion etcher for silicon dielectrics, to be delivered and installed in the DTU Nanolab cleanroom in the Copenhagen area. The instrument must support the full spectrum of etching of silicon-based dielectrics, from sub 100 nm nanostructures to depths of several tens of microns, requiring exceptional process controllability and tunability for ultra-precise, low-rate etches (< 100 nm/min) and high etch rate deep etches (approaching 500 nm/min). It must accommodate all silicon dielectrics of the form SixNy, SixOx, and SixOyNz, and be compatible with mask materials including Si, Cr, e-beam resists, and UV/DUV photoresists with high mask selectivity. The instrument must be configured for 150 mm wafer processing, with an option for a complete kit for 200 mm wafer processing. DTU will also have the option to purchase one additional identical instrument. Award criteria are Functionality and performance (50%), Quality of submitted samples (30%), and Price (20%).

    Competition
    Nov 23, 2026(4 days)
  • EPFL-Scientific Equipment

    Un lot de stations individuelles et manuelles pour la gravure de métaux et d’oxides

    L’EPFL-Scientific Equipment souhaite acquérir un lot de stations individuelles et manuelles pour la gravure de métaux et d’oxydes, destinées au Centre de MicroNanoTechnologie (CMi), une plateforme de salles blanches située dans le canton de Vaud et utilisée par les facultés de l’EPFL ainsi que par plus de 650 utilisateurs industriels et académiques actifs par an. Les équipements serviront à la recherche en micro- et nanofabrication, notamment pour préparer des surfaces aux propriétés requises. Sont recherchées des stations chimiques de qualité, faciles et sûres à utiliser et à maintenir, avec un contrôle flexible et robuste des traitements en environnement de R&D. La proximité et la réactivité du fournisseur, le support technique et procédés, ainsi que la disponibilité à long terme des pièces de rechange, systèmes de contrôle et logiciels sont également déterminants.

    Competition
    Dec 14, 2026(25 days)
  • VTT Technical Research Centre of Finland Ltd

    Laboratorie- og analyseutstyr

    Pilot-mitan autoklaavi

    TEKNOLOGIAN TUTKIMUSKESKUS VTT OY tarvitsee yhden (1) Pilot-mitan autoklaavin vaipallisten bioreaktorien sekä niiden tarvikkeiden sterilointiin Helsinki-Uudellamaalla. Hankintaan sisältyy pakollisena optiona ylläpitohuoltosopimus ja valinnaisena optiona laitteen kanssa yhteensopiva höyrykeitin. Sopimuksen kesto on 12 kuukautta. Tarjousten vertailuperusteena on 100 % hinta.

    Competition
    Nov 23, 2026(4 days)