Cryogenic Probe Station

The procurement of the Supply, Installation and Commissioning of a Focused Ion Beam Scanning Electron Microscope (FIB-SEM) with Gallium Ion Source

Danmarks Tekniske Universitet (DTU) needs the supply, delivery, installation, commissioning, and acceptance of one focused ion beam scanning electron microscope (FIB-SEM) dual-beam platform. This instrument will serve a multi-user research environment in the Copenhagen area for high-resolution surface imaging, site-specific cross-sectioning, TEM lamella preparation (including automated workflows), 3D FIB-SEM tomography, gas-assisted deposition and etching, nanoscale manipulation, and elemental microanalysis by energy-dispersive X-ray spectroscopy (EDS) and ToF-SIMS. The award criteria are Price (30%) and Quality of the solution (70%). Suppliers must provide at least 3 references for comparable agreements, each with a value of at least DKK 10,000,000, concerning the supply, delivery, installation, commissioning, and acceptance of a FIB-SEM dual-beam platform or a comparable service, with the agreement not being more than 5 years old.

Cryogenic probe station and measurement system

Aalto University Foundation sr needs a cryogenic probe station and measurement system to be delivered in Helsinki-Uusimaa. The award criteria are Price (30%), Usability (25%), Expandability and available accessories (25%), and Quality and performance (20%).

Delivery and installation of a ICP Reactive ion etcher for silicon dielctrics

Danmarks Tekniske Universitet - DTU needs an ICP Reactive ion etcher for silicon dielectrics, to be delivered and installed in the DTU Nanolab cleanroom in the Copenhagen area. The instrument must support the full spectrum of etching of silicon-based dielectrics, from sub 100 nm nanostructures to depths of several tens of microns, requiring exceptional process controllability and tunability for ultra-precise, low-rate etches (< 100 nm/min) and high etch rate deep etches (approaching 500 nm/min). It must accommodate all silicon dielectrics of the form SixNy, SixOx, and SixOyNz, and be compatible with mask materials including Si, Cr, e-beam resists, and UV/DUV photoresists with high mask selectivity. The instrument must be configured for 150 mm wafer processing, with an option for a complete kit for 200 mm wafer processing. DTU will also have the option to purchase one additional identical instrument. Award criteria are Functionality and performance (50%), Quality of submitted samples (30%), and Price (20%).

Equipment for Energy Hub at Aalborg University

Aalborg Universitet needs the supply, delivery, installation, and commissioning of educational and demonstration equipment for the AAU Energy Hub in Nordjylland, Denmark, over 5 years, with a maximum total value of 5,000,000 DKK. The equipment should support teaching, research, outreach activities, and demonstration of future energy systems, including renewable energy technologies, hydrogen, electrolysis, fuel cells, thermal systems, power generation systems, energy storage, smart grid operation, and digital energy management. The solution should combine high-quality educational equipment, industrial-grade components, digital integration capabilities, and long-term educational value, supporting interdisciplinary learning, project-based education, digital twins, data acquisition, smart energy systems, and future expansion of the Energy Hub. Offers will be evaluated based on quality (60%) and price (40%).

One Photonic Wafer Probe Station and one Photonic Assembly Station

Danmarks Tekniske Universitet - DTU needs a Photonic Wafer Probe Station and a Photonic Assembly Station for a 1-year contract, with a maximum total value of 1,250,000 EUR, to be delivered in the Copenhagen area. The Photonic Assembly Station is for connecting fibre array units (FAUs) to an optical chip, supporting research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility. The Photonic Wafer Probe Station is for characterizing the quality of photonic integrated circuits (PICs), including both optical and electrical performance, and supporting research, development, process qualification, and routine characterization activities. ficonTEC Service GmbH likely has a similar contract today. The award criteria are Price (17.6471%), Machine (incl. physical requirements) (8.8235% for each lot), Process (23.5294% for each lot), and Installation, service and guarantee (8.8235% for each lot). Suppliers must have had a net turnover of at least 10,000,000 DKK for each of the last 3 audited financial years and a positive equity for the last 3 audited financial years. Additionally, suppliers must provide at least 2 references for comparable agreements (value of at least 3,000,000 DKK) concerning the delivery of Photonic Wafer Probe Stations or comparable photonic equipment, with the agreements not being more than 3 years old.