Find

  • All tenders

Search results

  • Medite Europe DAC

    Persontransporttjenester

    RFT for the Provision of Shunting Services at Medite Europe DAC'26

    Medite Europe DAC needs shunting services at their facility at Redmondstown, Clonmel, Co. Tipperary, Ireland. The services involve moving packs of MDF from the Medite production site to different warehouse locations within a 1km and 20km radius of Clonmel, with occasional shunting to SmartPly (Belview Port) within a 50km radius. The contract has a maximum total value of 900,000 EUR and a duration of 1 month. The service provider must supply suitable equipment, vehicles (including a certified articulated tractor unit and two 13.3m curtain-sided trailers), and certified personnel (CPC with knowledge of Warehouse and Port Operations, with one nominated driver at all times) on a 6-day-a-week basis. A sustainable solution that positively reduces the facility's carbon footprint under Scope 3 is required. The service provider must also demonstrate the ability to provide backup equipment and experienced labor for de-coupling/re-coupling and tying down packs. Approximately 3,500 to 4,500 loads/shunts are expected per annum.

    CompetitionJul 22, 2026
    Aug 18, 2026(Expired)
    €900,000
  • Medite Europe DAC

    Sprinkleranlegg og brannsikring

    Tender for Project Shine for the Design, Supply and Install of Fire Suppression and Fire Abatement system at MEDITE Europe DAC ‘26

    Medite Europe DAC needs services for the design, supply, and installation of fire suppression and fire abatement systems for their "Project Shine" in Ireland, with a maximum total value of 2,250,000 EUR. The project involves installing fire protection systems for wet and dry fuel handling systems, a 56MW Biomass Energy Plant, MDF core and face dryers, and various ancillary plant and buildings. The systems must comply with NFPA standards, and all equipment, pipework, valves, and fittings must be FM approved. The contract duration is 1 month.

    CompetitionJun 11, 2026
    Jul 9, 2026(Expired)
    €2,250,000
  • Medite Europe DAC

    Mekaniske installasjoner

    PQQ for the Design, Supply, Installation and Commissioning of a Flue Gas Abatement System at Medite Europe DAC

    Medite Europe DAC needs a flue gas abatement system and associated ancillaries for a biomass boiler installation, including design, supply, installation, and commissioning. The system must treat boiler flue gas to reduce particulate emissions, integrate with existing plant infrastructure, and achieve required emissions performance while maintaining operability and safety. The project duration is 1 month. The successful contractor will undertake detailed engineering, equipment manufacture and supply, delivery, erection, testing, commissioning, performance verification, operator training, and handover of the complete system. The proposed equipment must be proven industrial technology and conform to European legislation and standards.

    CompetitionJun 5, 2026
    Jun 26, 2026(Expired)
    €0
  • Medite Europe DAC

    Sprinkleranlegg og brannsikring

    Tender for the Design, Supply and Installation of Fire Extinguishing (Suppression) Systems in 3 MCC Rooms at MEDITE Europe DAC ‘26

    Medite Europe DAC needs services for the design, supply, and installation of fire extinguishing (suppression) systems in three Motor Control Centre (MCC) rooms at their plant in Ireland. The project, with a maximum total value of 165,000 EUR, is estimated to take approximately 1 month for the current phase, with an overall program objective of ensuring all site MCC and HV switch-rooms comply with legislative requirements and industry best practice for extinguishing electrical fires automatically over an estimated 4-year period. The scope includes evaluating enclosure integrity, determining baseline cooling and room pressure, recommending and executing remedial measures, designing and specifying optimal suppression and detection systems, fire sealing rooms, and installing, linking, testing, and certifying the systems. The preferred system is an Inert Gas system with appropriate Smoke Detection.

    CompetitionApr 10, 2026
    May 1, 2026(Expired)
    €165,000
  • Medite Europe DAC

    Sikkerhetstjenester - Bygg og anlegg

    Tender for Project Shine Security and Cleaning Services at Medite Europe DAC‘26

    Medite Europe DAC in Ireland needs security and cleaning services for Project Shine for 22 months, with a maximum total value of 225,000 EUR. The security role involves managing construction site access, recording incidents, and ensuring compliance with PPE, while the cleaning role includes daily cleaning of a compound area with a minimum of 18 cabins, a canteen, and welfare facilities, with the number of cabins increasing to approximately 36 for a defined period. The contractor must comply with Safety, Health and Welfare at Work (construction) Regulations 2013.

    CompetitionApr 2, 2026
    Apr 23, 2026(Expired)
    €225,000
  • Medite Europe DAC

    Anleggs- og infrastrukturbygging

    Tender for Installation and Upgrade of Air Compressors + Aeration Blowers at Medite Europe DAC

    Medite Europe DAC needs mechanical engineering contractor services for the installation and upgrade of air compressors and aeration blowers at their facility in Redmondstown, Clonmel, Co. Tipperary, Ireland. The project, valued at a maximum of 150,000 EUR, involves the removal and decommissioning of existing equipment, and the installation of free-issue compressors and blowers, including associated stainless-steel pipework, valves, exhaust ducting, and fire dampers. The works are expected to be completed during the Line 1 Annual Shutdown in June 2026, with a duration of 10 days for the shutdown, preceded by piping enabling works. The successful bidder will operate as the Project Supervisor Construction Stage (PSCS) and Contractor during the initial stages and as the Contractor during the shutdown. The scope is split into two lots: Lot 1 for the Compressed Air System Upgrade and Lot 2 for the Aeration Blower Upgrade.

    CompetitionFeb 23, 2026
    Mar 16, 2026(Expired)
    €150,000
  • Medite Europe DAC

    Kjemikalier og vannbehandling

    Tender for the Design, Supply and Installation of a Water Treatment System at Medite Europe DAC ‘26

    Medite Europe DAC needs a water treatment system designed, supplied, and installed at their MDF facility in Ireland, with a maximum total value of 450,000 EUR. The project duration is 1 month. The system must deliver 30m3/hr of water for a new energy plant and steam generator, and 15m3/hr for an existing energy plant, meeting specified water quality. It should be modular, fully automated with local and remote SCADA, and incorporate existing multi-media filters and pumps. The scope includes compliance with EU Machinery Directives, HAZOP recommendations, and provision of safety file information. The supplier must also provide details on annual operational running costs, a recommended spare parts package, and a 5-year after-sales service package including planned preventative maintenance, chemical and salt supply, regular testing, reporting, and training. The supplier is expected to advise Medite on suitable equipment/systems and provide option pricing for any unfulfilled requirements.

    CompetitionJan 20, 2026
    Feb 10, 2026(Expired)
    €450,000
  • Medite Europe DAC

    Diverse konstruksjonsmateriell

    Tender for the Supply, Installation of Rental Portacabins at Medite Europe DAC ‘26

    Medite Europe DAC needs the supply, installation, and eventual removal of various portacabins for temporary accommodation at their MDF facility in Ireland, with a maximum total contract value of 375,000 EUR over 1 month. This includes offices, containers, welfare facilities (showers, toilets, sinks), drying rooms, first aid rooms, and canteens. The supplier is responsible for all delivery, offloading, positioning, assembly, lift plans, and stairs erection, ensuring all units are fit for purpose, suitably fire-rated, have non-slip flooring, and smoke wired detectors. The supplier must also handle all design and certification requirements for electrical and plumbing. The portacabins are for the construction phase of "Project Shine," which involves modernizing the MDF facility with new plant and equipment.

    CompetitionJan 19, 2026
    Feb 9, 2026(Expired)
    €375,000
  • Medite Europe DAC

    Elektrisk infrastruktur og veibelysning

    Tender for the Supply of a Spare Transformer for MEDITE Europe DAC ‘25

    Medite Europe DAC needs a new spare 2500kVA transformer to be delivered to its site in Redmondstown, Clonmel, Co. Tipperary, Ireland, within 1 month, with a maximum total value of 50,000 EUR. The scope includes the complete transformer with all specified accessories and fittings, delivery to site, provision of drawings, operation and maintenance manuals, and test certificates, and a manufacturer’s warranty. The transformer must meet specific technical requirements, including a rated power of 2500 kVA, HV rating of 10.75/21.5KV, LV rating of 423V, and use biodegradable natural ester oil. The construction must feature a cold rolled grain-oriented silicon steel core, high conductivity copper windings, and a welded steel tank with corrosion protection.

    CompetitionNov 21, 2025
    Dec 12, 2025(Expired)
    €50,000
  • Medite Europe DAC

    Prosjekteringstjenester

    PQQ for MDF Blowline Upgrades at Medite Europe DAC

    Medite Europe DAC needs resin products for Blowline Upgrades at their facility in Dublin. The project involves supplying Blowline resin injection and steam recovery systems for a Medium Density Fibre production line, with an anticipated order placement in Q1 2026 and project completion by Q3 2026. The maximum total contract value is 250,000 EUR. The resin injection system should control and modulate resin application to ensure efficient use while maintaining product quality, with a desirable capability to apply other additives. The steam recovery system must recover steam from the Blowline for reuse on the refining system, ensuring minimal wood/fibre content. Both systems must be fully automated, proven technology, conform to best practice design principles, and comply with all relevant European legislation, including CE marking.

    CompetitionNov 12, 2025
    Dec 10, 2025(Expired)
    €250,000
  • Medite Europe DAC

    Rådgivende ingeniørtjenester for bygg og anlegg

    RFT for the Provision of Mechanical Services Framework at MEDITE Europe DAC ‘25

    Medite Europe DAC needs mechanical services for a framework agreement over 5 years at their plant in Redmondstown, Clonmel, Co. Tipperary, E91 V584. The services include annual large-scale shutdown works, fortnightly shutdown works, and hourly rate works related to projects, covering routine maintenance, maintenance testing, and downday schedule activities within the MDF/wood processing industry.

    Framework agreementNov 10, 2025
    Dec 1, 2025(Expired)
    €0
  • Medite Europe DAC

    Elektroinstallasjon i bygninger

    RFT for the Provision of Electrical Services Framework at MEDITE Europe DAC ‘25

    Medite Europe DAC needs electrical services for a framework agreement over 5 years at their plant in Redmondstown, Clonmel, Co. Tipperary, E91 V584. The services include annual large-scale shutdown works, fortnightly shutdown works, and hourly rate works related to projects, with specific tasks such as visual inspections, temperature monitoring, vibration analysis, oil analysis, running current checks, cabling/rewiring, insulation resistance tests, winding resistance tests, bearing insulation resistance checks, and shaft total indicated run out measurements. The buyer is seeking suitably qualified electrical companies with extensive experience in the MDF/wood processing industry.

    Framework agreementNov 10, 2025
    Dec 1, 2025(Expired)
    €0
  • Medite Europe DAC

    Bygg og anlegg - Oppføring, renovering og vedlikehold av bygninger

    Tender for Various Small Building and Plant Maintenance Works at MEDITE Europe DAC ‘25

    Medite Europe DAC needs various small building and plant maintenance works at their facility in Redmondstown, Clonmel, Co. Tipperary, Ireland, for a contract period of 3 years with an option to extend for a further 1 year, with a maximum total value of 50,000 EUR. The services include minor road and footpath repairs, logyard maintenance, general building maintenance/repairs, minor concrete repair works, and environmental cleaning tasks. The contractor must be capable of delivering high-quality work while adhering to site safety, environmental, and operational standards, and be able to assign a small team for urgent situations, including after-hours and weekend work. The works will take place on a live MDF manufacturing facility, requiring full compliance with Medite’s EHS Contractor Requirements.

    CompetitionNov 5, 2025
    Nov 25, 2025(Expired)
    €50,000
  • Medite Europe DAC

    Elektrisk utstyr og belysning

    PQQ for MDF Forming Upgrades at Medite Europe DAC'25

    Medite Europe DAC needs forming technology/equipment to upgrade an MDF pendistor forming station in Dublin. The equipment is required to improve weight control and spreading accuracy of the fiber mat for 3mm to 18mm finished DMF product. The technology must be proven and conform to best practice design principles and all relevant European legislation, including CE marking.

    CompetitionNov 4, 2025
    Nov 24, 2025(Expired)
    €0
  • Medite Europe DAC

    Rådgivende ingeniørtjenester for bygg og anlegg

    PQQ for MDF Blowline Upgrades at Medite Europe DAC'25

    Medite Europe DAC needs blowline resin injection and steam recovery systems for a Medium Density Fibre production line, to be delivered in Dublin. The project duration is 1 month. The resin injection system should control and modulate resin application based on product requirements, ensuring efficient resin use and maintaining product quality, with a desirable capability to apply other additives like dye, urea, wax, and hardener, and be fully automated. The steam recovery system should recover steam from the blowline for reuse in the refining system, with minimal wood/fibre content and without causing blockages. The equipment must be a proven technology, conform to best practice design principles, and all relevant European legislation, including CE marking.

    CompetitionNov 4, 2025
    Nov 24, 2025(Expired)
    €0
  • Medite Europe DAC

    Vei- og gatearbeid

    Request for Tender for Perimeter Road Section Resurfacing (incl. Asphalt and Concrete work) at MEDITE Europe DAC ‘25

    Medite Europe DAC needs resurfacing of sections of internal perimeter road at their facility in Redmondstown, Clonmel, Co. Tipperary, Ireland, with a maximum total value of 550,000 EUR over 1 month. The project is broken into three lots: concrete slip road to Fuel + Chip yard, concreting of road sections at the Log Yard junction, and asphalt resurfacing sections of the perimeter road. The successful contractor is responsible for supplying all materials, appropriate plant and labor, creating temporary bypass roads, preliminaries and insurance, health and safety (including the PSCS role), and traffic management. A preliminary Health + Safety plan and a traffic management plan must be submitted with the bid. The contractor must also scan proposed works areas for underground services, conduct cube tests for concrete works to European Standard IS/EN 206-1 / BS EN 12390-3, and remove all excavation waste to a licensed waste contractor.

    CompetitionOct 17, 2025
    Nov 7, 2025(Expired)
    €550,000
  • Medite Europe DAC

    Konsulenttjenester innen prosjektstyring og bygging

    Request for Tender for for Project Management Services at MEDITE Europe DAC ‘25

    Medite Europe DAC needs project management services for the construction phase of "Project Shine" in Dublin, Ireland, for a duration of 1 month, with a maximum total value of 950,000 EUR. The services include a Construction Project Manager, Mechanical Construction Supervisor, Electrical + Instrumentation Construction Supervisor, a part-time Scheduler, and Project Administration (including Document Control). These services are required to support the modernization of their MDF facility, which involves the installation and upgrading of a wet fuel handling system, dry fuel handling system, biomass fired energy plant, and MDF dryers.

    CompetitionOct 3, 2025
    Oct 31, 2025(Expired)
    €950,000
  • Medite Europe DAC

    Brann- og sikkerhetstjenester

    Request for Tender for Health and Safety Consultancy Services (PSCS) at MEDITE Europe DAC ‘25

    Medite Europe DAC needs health and safety consultancy services (PSCS) for the construction phase of "Project Shine" in Dublin, with a maximum total value of 250,000 EUR over 1 month. The project involves modernizing their MDF facility with new equipment, including wet and dry fuel handling systems, an energy plant, MDF dryers, and associated services and utilities. The PSCS services include organizing cooperation and communication between contractors, identifying and mitigating hazards, reviewing vendor proposals for compliance with EU Machinery Directive and ATEX requirements, ensuring HAZOP recommendations are implemented, reviewing building design for safety compliance, completing necessary notices to H.S.A., completing the Health + Safety Plan, appointing a safety adviser if needed, providing Safety File information to the PSDP, managing welfare facilities, site segregation, inductions, maintaining various safety registers and records, and issuing and closing Permit to Works.

    CompetitionOct 3, 2025
    Oct 31, 2025(Expired)
    €250,000
  • Medite Europe DAC

    Persontransporttjenester

    Request for Tender for the On-Site Transportation of Logs at Medite Europe DAC '25

    Medite Europe DAC needs services for the on-site transportation of logs in Dublin, Ireland, for a 1-month period, with a maximum total value of 80,000 EUR. The service involves using a driver-operated rigid truck and trailer equipped with a crane with a cabin to transport wood products. The work primarily includes crane-based deliveries to designated storage fields from April through July, and then transporting stored material from storage fields to a staging area from October through February. The contractor will be paid an hourly rate, which should include the driver, vehicle, crane, and maintenance costs. Working hours for the haulier will be 4:00 am – 4:00 pm, with a required start time no later than 5:00 am. Contractors must have completed Safe Pass and Manual Handling training, sign a Risk Assessment Safety Method Statement (RAMS), and any lifting equipment used on site will require a GA1 certificate. Hauliers must also complete the online SitePass induction.

    CompetitionSep 15, 2025
    Oct 6, 2025(Expired)
    €80,000
  • Medite Europe DAC

    Bygg og anlegg - Oppføring, renovering og vedlikehold av bygninger

    Request for Tender for Essential Site Upgrade Works at MEDITE Europe DAC ‘25

    Medite Europe DAC needs building/civil contractor services for essential site upgrade works in Dublin, with a maximum total value of 75,000 EUR over 1 month. The scope of work includes the diversion of fire main services and electrical services, involving trench excavation around existing services.

    CompetitionSep 4, 2025
    Sep 19, 2025(Expired)
    €75,000
  • Medite Europe DAC

    Arkitekttjenester

    PQQ - Medite Europe DAC are seeking expressions of interests for the Civil, Structural and Architectural (CSA) Contractor for the Construction Stage of Project Shine’25

    Medite Europe DAC needs a Civil, Structural and Architectural (CSA) Contractor for the construction stage of Project Shine'25, involving the modernization of their MDF facility in Dublin. The project, valued at a maximum of 3.8 million EUR, is expected to last 1 month and includes extensive civil, structural, and architectural works for new equipment such as wet and dry fuel handling systems, an energy plant, and MDF dryers. This encompasses excavation, earthworks, construction of various pads, bases, structures, and modifications to existing buildings, as well as associated civil works for services and utilities.

    CompetitionAug 20, 2025
    Sep 10, 2025(Expired)
    €3,800,000
  • Medite Europe DAC

    Elektroinstallasjon i bygninger

    PQQ - Medite Europe DAC are seeking expressions of interests for the Electrical Contractor for the Construction Stage of Project Shine’25

    Medite Europe DAC needs electrical contractor services for the construction stage of Project Shine’25, a modernization project for their MDF facility, with a maximum total value of 900,000 EUR over 1 month. The project involves the installation of new equipment, including wet and dry fuel handling systems, an energy plant, and MDF dryers. The electrical contractor's scope of work includes lighting, fire detection, earthing and lightning protection, site services, power distribution, and mechanical wiring for various areas such as the construction compound, energy plant MCC, thermal oil primary and secondary pump rooms, dryer MCC, wet fuel MCC, and the energy plant + ESP. The services are to be delivered in Dublin.

    CompetitionAug 20, 2025
    Sep 10, 2025(Expired)
    €900,000
  • Medite Europe DAC

    Mekaniske installasjoner

    PQQ- Medite Europe DAC are seeking expressions of interests for the Mechanical Contractor for the Construction Stage of Project Shine’25

    Medite Europe DAC needs mechanical contractor services for the construction stage of Project Shine, involving the installation of new equipment for their MDF facility, including wet and dry fuel handling systems, an energy plant, MDF dryers, and associated services and utilities. The project, located in Dublin, has a maximum total contract value of 1,000,000 EUR and a duration of 1 month. The scope of work includes construction compound setup, HVAC installation, compressed air supply, process water supply, steam/condensate return, thermal oil installation, insulation, and testing and commissioning of mechanical services across various plant areas and equipment modifications.

    CompetitionAug 20, 2025
    Sep 10, 2025(Expired)
    €1,000,000
  • Medite Europe DAC

    Rengjøringstjenester spesialiserte

    RFT for the Supply of Cleaning Services at Medite Europe DAC '25

    Medite Europe DAC needs cleaning services in Dublin for a maximum total value of 30,000 EUR over 1 month. The successful candidate will be required to supply professional cleaning services, including all staff, equipment, tools, and cleaning products. The cleaning and maintenance of specified areas should occur during the hours of 06:00 – 14:30 (Monday to Friday). Additional resources will be required to cover Medite's full-time person during annual leave/absences, shutdowns, maintenance days, customer visits (approximately 10 events annually), and other cleaning as required, estimated at around 350 hours annually. Medite requires significant flexibility and expects an onsite response rate of 1-2 hours.

    CompetitionAug 6, 2025
    Aug 27, 2025(Expired)
    €30,000
  • Medite Europe DAC

    Bygg og anlegg - Oppføring, renovering og vedlikehold av bygninger

    Request for Tender for Facility Upgrades to Line 2 and BDR Control Rooms at MEDITE Europe DAC ‘25

    MEDITE Europe DAC requires an upgrade of facilities in its premises as outlined in this document. Site Location: Medite, Redmondstown, Clonmel, Co. Tipperary. It is envisaged that the works will commence in Q3 of 2025. Please note that the successful Bidder is responsible for the Supply and Installation of the fit out works, including alteration work as required, pipework and all materials, components, plant, labour and equipment to complete the works as set-out in the Scope of Works. The works will take place on a live MDF manufacturing facility as outlined in the tender specification. For the duration of this contract, the factory will remain in production. Medite is an operating mill with production activity on‐going within the area and therefore full compliance with Medite’s EHS Contractor Requirements is necessary. Due to the nature of works as set out in this Tender and other maintenance + construction activity being carried out on site, these have been deemed to be “CONSTRUCTION WORK’’ as per the HSA’s Safety Health and Welfare at Work (Construction) Regulations 2013. The Project Supervisor Construction Stage must: • Co-ordinate the implementation of the construction regulations by contractors. • Organise co-operation between contractors and the provision of information. • Co-ordinate the reporting of accidents to the Authority. • Notify the Authority before construction commences where construction is likely to take more than 500 person days or 30 working days. • Provide information to the site safety representative. • Co-ordinate the checking of safe working procedures. • Co-ordinate measures to restrict entry on to the site. • Co-ordinate the provision and maintenance of welfare facilities. • Co-ordinate arrangements to ensure that craft, general construction workers, and security workers have a Safety Awareness card, e.g. Safe Pass and a Construction Skills card where required. • Co-ordinate the appointment of a site safety representative where there are more than 20 people on site. • Provide all necessary safety file information to the PSDP. • Monitor the compliance of contractors and others and take corrective action where necessary. • Notify the Authority and the client of non-compliance with any written directions issued. • The PSCS may issue directions to designers or contractors. Contractors must: • Co-operate with the PSCS. • Provide any site-specific information or relevant extract of your safety statement to the PSCS. • Promptly provide the PSCS with information required for the safety file. • Comply with directions from Project Supervisors. • Report accidents to the Authority and to the PSCS where an employee cannot perform their normal work for more than three days. • Comply with site rules and the safety and health plan and ensure that your employees comply, identify hazards, eliminate the hazards, or reduce risks during construction. • Facilitate the Site Safety Representative. • Ensure that relevant workers have a safety awareness card and a construction skills card where required. • Provide workers with site specific induction. • Appoint a safety officer where there are more than 20 on site or 30 employed. • Consult workers and Safety Representatives. • Monitor compliance and take corrective action. **** Please see the attached Tender Document for the Full and Complete Scope of Works

    CompetitionJul 18, 2025
    Aug 15, 2025(Expired)
    €180,000
  • Medite Europe DAC

    Anleggs- og infrastrukturbygging

    Request for Tender for the Fabrication and Installation of Access Platforms at MEDITE Europe DAC ‘25

    MEDITE Europe DAC is looking for suitable qualified companies to fabricate and install access platforms at their site in Redmondstown, Clonmel, Co. Tipperary. It is envisaged that the works will take place during the Q3 of 2025 The works will take place on a live MDF manufacturing facility as outlined in the tender specification. For the duration of this contract, the factory will remain in production. Live manufacturing areas - the operational plant and processes present a particular set of safety hazards including ATEX issues, chemical safety, fire safety and risk of explosion. For these reasons – Contractor access to manufacturing areas will be by permit only and any unauthorised access to Medite manufacturing areas will result in disciplinary measures up to and including removal from site. Any process involving interaction between plant and project operations, including hot work and work to services, must be planned in detail with the input of Medite. Please note that the factory operates 24/7 and access and egress via the works area will be required. Phasing of the works would be required. This is to ensure that there is no impact on the day-to-day operations within the plant. Under no circumstances should the construction works cause unnecessary interference to the Medite plant and its operations. All works must be planned and scheduled in line with Medite requirements and with the approval of Medite site management in advance. Medite is an operating mill with production activity on‐going within the area and therefore full compliance with Medite’s EHS Contractor Requirements is necessary. Fabrication + Installation of Access Platforms The contractor will be responsible for following: • PSCS • Site survey and confirmation of all dimensions prior to final fabrication. • Fabrication of platforms as described in drawings listed. • Painting and coating as per specifications mentioned in the drawings. • Removal of existing access platforms to facilitate installation of new access platform. • Temporary lighting. (if required) • Fire watch (Hot Work) under permit only. • Deliver and unload at site. • Installation of newly fabricated platforms and ladders including all required support and fixings. Including all lifting equipment and temporary access required to install all access and platforms. • Fabricate and modify any changes required to existing platforms. • Clean down of installation area upon completion and at the end of each working day. • Handover of documentation for Safety File. • Preliminaries of insurance. • All relevant paperwork. Contractors must: • Co-operate with the PSCS. • Provide any site-specific information or relevant extract of your safety statement to the PSCS. • Promptly provide the PSCS with information required for the safety file. • Comply with directions from Project Supervisors. • Report accidents to the Authority and to the PSCS where an employee cannot perform their normal work for more than three days. • Comply with site rules and the safety and health plan and ensure that your employees comply. • Identify hazards, eliminate the hazards, or reduce risks during construction. • Facilitate the Site Safety Representative. • Ensure that relevant workers have a safety awareness card and a construction skills card where required. • Provide workers with site specific induction. • Appoint a safety officer where there are more than 20 on site or 30 employed. • Consult workers and Safety Representatives. • Monitor compliance and take corrective action. **Please see the Tender Document attached for the full scope of works***

    CompetitionJul 17, 2025
    Aug 15, 2025(Expired)
    €150,000
  • Medite Europe DAC

    Kjemikalier og vannbehandling

    Request for Tender for the Supply and Delivery of Sodium Bisulphite to MEDITE Europe DAC ‘25

    MEDITE Europe DAC is looking for suitably qualified suppliers to supply approx. 1,500 tonnes per year of Sodium Bisulphite solution to our site in Clonmel – approximately 1 load per week (20,000 Litres / 27 tonne per load). The specification we are looking for is between 35- 40 percent Concentration Sodium Bisulphite Solution. Note, all selected or shortlisted products will need to be vigorously trial and tested in the production process before a contract is awarded. The contract term will be for a minimum of 3 years, however Medite reserves the right to extend the contract by a further 2 years pending a performance and price review each and every year. Due to the current market volitivity we will be requesting that the pricing in the tender submission will be valid for 60 days, however a robust pricing mechanism must be accompanied to address pricing commodity movements on a monthly basis. The supplier shall be responsible for the delivery responsibilities under DAP. The supplier shall ensure that a surplus load will be able to be called upon at short notice, therefore quayside arrangements should be strongly considered by the supplier on maintaining safety stocks and reducing supply shortages situations that may arise from time to time. MEDITE EUROPE DAC reserves the right to refuse any and all deliveries made with equipment that is poorly maintained or does not meet the specification requirements. The Supplier’s tanks or trailers shall be clean and free of residue that may contaminate the Supplier’s product or impede the unloading process. It is the Supplier’s responsibility to verify the cleanliness of the transporting equipment before loading. All appurtenant valves, pumps, and discharge hoses used for the delivery of Sodium Bisulphite shall be supplied by the Supplier and shall be clean and free from contaminating material. The Supplier shall supply the equipment to unload the chemical from their truck (i.e., pumps, flexible hoses, etc.). However, the Supplier will connect to MEDITE EUROPE DAC's permanent fill piping that fills the bulk tanks. MEDITE EUROPE DAC may reject a load if the equipment is not properly cleaned. The Supplier shall furnish MEDITE EUROPE DAC an approved, leak-free connection device between the trailer and MEDITE’s intake receptacle. The Supplier shall observe the entire filling operation at each delivery and shall immediately report any spills caused during the filling operations. The Supplier shall take immediate and appropriate actions to clean up any spilled chemical. If the spill is not cleaned up, MEDITE EUROPE DAC will hire a certified hazardous material handling company to clean the spill, and the cost of such service will be charged to the Supplier and deducted from the amount due to the Supplier. If the spillage is not the fault of the Supplier or their subcontractor, the Supplier shall be relieved of cleanup of the spill.

    CompetitionMay 28, 2025
    Jun 18, 2025(Expired)
    €900,000
  • Medite Europe DAC

    Elektrisitet og energiforvaltning

    Tender for the Supply and Delivery of Diesel Oil (Non-Road) at Medite Smartply 2025

    MEDITE SMARTPLY are seeking competitive tender submissions from suitably qualified suppliers for the Supply and Delivery of Diesel Oil and Hydrotreated Vegetable Oil HVO. Supply and delivery should be in accordance with the attached Specifications, Conditions of Purchase, Form of Tender and this Invitation to Tender. Diesel is the primary fuel being used at Medite Smartply, however, we are looking to increase our usage of HVO as part of our Corporate Sustainability Strategy. The intention is to increase our consumption of HVO over the course of this contract to reduce our carbon footprint. The required quantity will be approximately 475,000 litres for Medite Smartply per annum, However, it will be subjected to fluctuations due to production volume and seasonality related issues. Tank Storage Capacity at Smartply is 70,000 litres for Diesel Oil + 70,000 litres for HVO, can accept deliveries up to 30,000 litres. Tank Storage Capacity at Medite is 22,000 litres for Diesel Oil only, no capacity for HVO currently, can accept deliveries between 15,000 to 18,000 litres. We are also requesting that suppliers consider installing a telemetry system on all tanks and adopt vendor managed inventory VMI as part of your tender proposal. The following products needs adhere to Diesel and gas oil product Principal Regulations means Sulphur Content of Heavy Fuel Oil, Gas Oil, and Marine Fuels Regulations 2008 S.I. No. 119 of 2008 HVO safety data sheet, technical data sheet along with a International Sustainability + Carbon Certification ISCC PLUS Certification Product needs to be ultra low sulphur gas oil, marked green product. Tenderers must state a guaranteed delivery period from receipt of official order. Deliveries should be based on a call off basis within 2 to 3 days after an order is placed. Tenderers are required to maintain stock levels to ensure that they can provide satisfactory delivery of goods within the guaranteed delivery period Deliveries must only be made from Monday to Friday during normal working hours Purchase order numbers must be clearly marked on delivery docket and invoices Deliveries must be accompanied by a printed delivery docket When the driver arrives to site, he or she must contract stores personnel, and he or she will assign the storage tank to be used. Under no circumstances should a driver empty the contents into any Medite Smartply tank without being advised by stores first. Tenderers must be able to deliver to both Medite and Smartply Facilities as outlined in Table 1 Tenderers must indicate if they have a minimum delivery amount in litres per delivery. If so, please state. Delivery must take place within normal working hours ***Please see tender document for full and complete scope of works***

    CompetitionMay 28, 2025
    Jun 18, 2025(Expired)
    €1,000,000
  • Medite Europe DAC

    Industrimaskiner

    Supply of New Air Compressors and New Blowers for WWTP at Medite Europe DAC '25

    MEDITE Europe DAC requires the supply and equipment commissioning of New Air-Cooled Compressors (2 no.) and New Blowers in WWTP (2 no.). Please note NO installation will be required and the decommissioning and the removal of the existing compressors and blowers will be undertaken by Medite Europe DAC. Background The plant is in operation for 24 hours per day, 7 days per week and 50 weeks per year. A reliable supply of compressed air is absolutely essential to our processes. Also, a reliable supply of air via blowers is absolutely essential to the biological life in WWTP plant. A recent evaluation by our Energy Partner EM3 of our existing compressors and blowers in WWTP - has highlighted based on high run hours greater than 100,000 hours that four key assets are now recommended for replacement at Medite. There are four compressors in main compressor room, Kaeser 1 VSD, Kaeser 2 FS, Kaeser 3 FS, Kaeser 4 FS in existing compressor room. Desired usage for four air cooled compressors is three in service (two fixed and variable speed controlling)/one fixed speed left off in standby mode. There are two existing blowers (of two no.) in WWTP also require to be replaced. Therefore, the following tender requirements to market in parallel is required as one overall supply package: 1) Supply of two new fixed speed air-cooled compressors (to replace two fixed speed air-cooled compressors no. 2 + no. 3 of the four no. existing Kaeser compressors). 2) Supply of two new screw blowers in WWTP area of plant to replace two existing blowers. The air demand (of the main system) at present has been measured as maximum capacity of 6,120 m3/hour of compressed air via three (fourth back-up) Kaeser screw compressors (Three duty/One Standby is desired working arrangement). Hence, two new fixed speed compressors must deliver at minimum 4,080 m3/hour to peak at 4,500 m3/hour at supply pressure of 7.4 bar(g) with a mean demand of 4,100 m3/hour as shown below in recent compressed air mapping study by EM3 for Medite: Requirements • Please provide proposals for two compressor units fixed speed at 7.5 bar(g). • These two machines will have fixed speed drive motors to meet the base load. •All machines must be CE compliant •The compressor packages with air cooled oil injected rotary screw units from the vendors standard product line and will include the following equipment: •Air end and drive arrangement •Inlet filter •Safety valves •Capacity controls for fixed speed units •Discharge check valve •Base plate with anti-vibration mountings •Oil cooler, filtration and separation system •After cooler with zero loss electronic condensate drain valve •Cooling fan and motor (if required) •High efficiency motors •Variable speed drive and controller for variable unit •Starter •Control panel with standard readouts and alarms and trips •All to be installed within an acoustic cabinet that has connections for ducting for inlet and exhaust air streams. •All condensate drains to be of the electronic zero loss type. Compressor Control • An electronic control system is to be supplied that will enable two compressor units to be controlled to ensure that the VSD unit on Kaeser No. 1 VSD is always used as control unit whatever the demand. The controller will provide close pressure control within 0.1bar irrespective of the demand. • The control system must be capable of interfacing with the factory BMS that will show the duty compressor situation and the power being consumed by the compressors. The power consumption will be data logged to enable electronic records to be kept. • All electrics to be to suit site 400v/3ph/50hz for main motors and 110v/1ph/50hz for control. • All performance criteria for flow and power consumption to be quoted in accordance with the CAGI/Pneurop PN2CPTC2 protocol. **** Please see tender document for full and complete scope of works.****

    CompetitionMay 13, 2025
    Jun 3, 2025(Expired)
    €180,000
  • Medite Europe DAC

    Rådgivende ingeniørtjenester for bygg og anlegg

    Request for Tender for the Supply and Installation of a Wastewater Storage Tank and Associated Pipework at Medite Europe DAC ‘25

    MEDITE Europe DAC is looking for suitably qualified Engineering Companies for the Supply and Installation of 1000m3 Wastewater Balance Tank and Associated Works at their Medite Facility. Site Location: Medite Smartply, Redmondstown, Clonmel, Co. Tipperary. It is envisaged that the works will commence in Q3 of 2025. Please note that the successful Bidder is responsible for the Supply and Installation of the Wastewater Storage Tank, including Civil Work required, Pipework and all Materials, Components, Plant, Labour to complete the works as set-out in the Scope of Works. The works will take place on a live MDF manufacturing facility as outlined in the tender specification. For the duration of this contract, the factory will remain in production. Live manufacturing areas - the operational plant and processes present a particular set of safety hazards including ATEX issues, chemical safety, fire safety and risk of explosion. For these reasons – Contractor access to manufacturing areas will be by permit only and any unauthorised access to Medite manufacturing areas will result in disciplinary measures up to and including removal from site. Any process involving interaction between plant and project operations, including hot work and work to services, must be planned in detail with the input of Medite. Please note that the factory and WWTP operates 24/7 and access and egress via the works area will be required. Phasing of the works would be required. This is to ensure that there is no impact on the day-to-day operations within the plant. Under no circumstances should the construction works cause unnecessary interference to the Medite plant and its operations. All works must be planned and scheduled in line with Medite requirements and with the approval of Medite site management in advance. Medite is an operating mill with production activity on‐going within the area and therefore full compliance with Medite’s EHS Contractor Requirements is necessary. Due to the nature of works as set out in this Tender and other maintenance + construction activity being carried out on site, these have been deemed to be “CONSTRUCTION WORK’’ as per the HSA’s Safety Health and Welfare at Work (Construction) Regulations 2013. Client/ PSDP: Medite Europe DAC - Redmondstown, Clonmel, Co. Tipperary - James Kennedy – 052 61 82300 The successful Bidder will operate as ‘’PSCS and CONTRACTOR’’ and will be required to provide a Construction Stage Plan and Handover Documentation to the ‘’Client/PSDP’’. The Contractor is responsible for the following: 1.PSCS and Construction Site Health + Safety. 2.All Groundworks/civils required for the installation of the Storage Tank. 3.Supply, Delivery and Installation of a 1000M3 Wastewater Balance Tank. 4.Supply and Delivery, Pipe Bridge and Pipe Supports. 5.Supply and Delivery Tank Access Ladders + Platform including Modification to Existing Platform. 6.Supply, Fabrication and Installation of all required Dairy Tube 316 Pipework and Tie-Ins. 7.Supply and Installation of all required Pumps, Valves, Flow meters, Level Sensors + Flow Measurement Equipment. 8.Modification of Existing WWTP Perimeter Mesh Panel Fencing. 9.Commissioning Attendance. 10.Preliminaries and Insurance. 11.Handover Documentation. The Contractor carrying out these works is required to act and carry out responsibilities as PSCS + Contractor for the duration of these works. The Project Supervisor Construction Stage must: • Co-ordinate the implementation of the construction regulations by contractors. • Organise co-operation between contractors and the provision of information. • Co-ordinate the reporting of accidents to the Authority. • Notify the Authority before construction commences where construction is likely to take more than 500 person days or 30 working days. * Please see the Tender Document attached for the full and complete Scope of Works *

    CompetitionMay 6, 2025
    May 27, 2025(Expired)
    €650,000
  • Medite Europe DAC

    Anleggs- og infrastrukturbygging

    RFT for the Installation of a Thin Board Double-Up Station at Line 1 Press Outfeed and Replacement Transport Carriage in L1 Storage Field at Medite Europe DAC‘25

    MEDITE Europe DAC are seeking suitably qualified Mechanical Engineering companies to install a Transport Carriage and a Thin board Doubling-up station at their plant at Medite Europe DAC, Redmondstown, Clonmel, Co. Tipperary. Part 1. Installation of thin board Double-Up station at Line 1 Press outfeed MEDITE Europe DAC requires the installation of a board transport / thin board Doubling-up station between L1 Press exit and the 1 board cooler, to accommodate master panel of different sizes. This is composed of 3 connected belt conveyors, a thin board blocking mechanism (pneumatic) and some local control panels mounted on it. It is 9655mm in total length and 3139 in width. It will replace the existing roller-conveyor and similarly will be located above existing angled conveyor (staying) into the board-breaker. Its legs will be on same footprint, sitting outside those of angled conveyor. Installation will first require removal of the roller conveyor. The OEM supplying the system is Kontra AG. It is envisaged that removal of existing roller conveyor and replacement with Double-Up station will take place during Line1 annual shutdown (ASD) in June 2025 (Wks. 24 + 25). Removal of old conveyor, mechanical installation of new one and connection of services is to take place in the first week of ASD. Electrical works / programming will be completed by Medite/Kontra during second week of ASD. The expected duration of the ASD (downtime) will be 12 days. This will be followed by approximately 5 days of testing + commissioning during 1st week after restart of production (Wk 26), during which the contractor needs to be available to support onsite and troubleshoot and rectify any issues that may arise during HO. The OEM (Kontra) will supply a Mechanical fitter, an Electrical technician and an e-Tech/PLC programmer to oversee the works. Access platforms, stairs and ladders to current conveyor are non-compliant with latest EN standard. The successful bidder will be responsible for the fabrication + installation of new platforms, stairs, etc. and removal of old hardware, and to complete the works as set-out in the Outline of Works in the above timeframe. PSCS - Successful bidding contractor Part 2. Replacement Transport Carriage in L1 Storage Field MEDITE Europe DAC requires the installation of a new ‘basic’ transport carriage in L1 Storage Field, as shown. It will replace the existing Storage field carriage (ca. 2002) and with be controlled via Ethernet-IP and the AB Control Logix platform. Installation will first require removal of the existing transport carriage The OEM supplying the system is Kontra AG. These works also to take place during wks. 24 + 25 in parallel with Double-Up The Contractor is responsible for the following: • All Lifting Equipment (crane, hoists, slings, etc.) and Scaffolding / Access platforms (MEWPs, etc.) to carry out the works, temporary, mobile or fixed • Lift plan and appropriate lifting gear • Furnishing of the necessary devices and heavy tools (e.g. cutting + welding gear, hand-tools, battery operated power tools). • Transport of mounting work pieces to mounting position, protection of mounting place and materials from detrimental influence of any kind, cleaning of the area after installation is complete. *Please see the Tender Document attached for the full and complete scope of works *

    CompetitionJan 15, 2025
    Feb 5, 2025(Expired)
    €75,000